)
The CEM DT-1308 is an easy-to-use light meter with wide measuring range up to 400,000 lux, large LCD display, 41-segment analog bargraph, relative mode and user-selectable measuring units.
Ideal for environmental monitoring, health and safety checks, and industrial applications.
Specification
Measures both Lux and Foot Candles (FC)
Manual range selection of 5 ranges (Lux), 4 (FC)
Impact-resistant ABS case with protective rubber boot
Silicon photo diode sensor and spectral response filter
Fully cosine corrected
Sensor connected to the instrument by 1.5 metre coiled cable
Measuring rate of 1.5 times per second
Easy to read large 43mm backlit LCD display
Peak hold
Data hold freezes measured values
Max/min hold
Relative reading
Over range indication
Reset function
Auto power off after 30 minutes
Low battery indication
Ideal for environmental monitoring, health and safety checks, and industrial applications.
Specification
Measures both Lux and Foot Candles (FC)
Manual range selection of 5 ranges (Lux), 4 (FC)
Impact-resistant ABS case with protective rubber boot
Silicon photo diode sensor and spectral response filter
Fully cosine corrected
Sensor connected to the instrument by 1.5 metre coiled cable
Measuring rate of 1.5 times per second
Easy to read large 43mm backlit LCD display
Peak hold
Data hold freezes measured values
Max/min hold
Relative reading
Over range indication
Reset function
Auto power off after 30 minutes
Low battery indication
View Basket
Recover Basket