)
The Ridgegear RGL2 lanyard is of “traditional” type, using a five tuck spliced rope fitted with thimbles at each end.
The lanyard is fitted with a standard shock absorber pack, even though the rope itself has some shock absorbing capacity. The rope used in the manufacture of this lanyard, shows some resistance to alkalis, oils and organic solvents.
This lanyard should be used when the operative is working from a static position, connected to a fixed anchor point. If movement between anchorages is required, a twin leg lanyard should be used RGL3, to provide constant protection.
Supplied as the following
Without karabiners
With RGK1 - 19mm karabiner
With RGK11 - 60mm Scaffold karabiner sown into the lanyard
The lanyard is fitted with a standard shock absorber pack, even though the rope itself has some shock absorbing capacity. The rope used in the manufacture of this lanyard, shows some resistance to alkalis, oils and organic solvents.
This lanyard should be used when the operative is working from a static position, connected to a fixed anchor point. If movement between anchorages is required, a twin leg lanyard should be used RGL3, to provide constant protection.
Supplied as the following
Without karabiners
With RGK1 - 19mm karabiner
With RGK11 - 60mm Scaffold karabiner sown into the lanyard
View Basket
Recover Basket