)
The Ridgegear RGL1 lanyard is an industry standard, and normally the minimum equipment issued with a harness for working at height.
The “Soft Edge” webbing used in the manufacture provides greater strength, wear and shear resistance compared to other webbing. It is also treated with a water repellent coating which should extend the life of this product.
This lanyard should be used when the operative is working from a static position, connected to a fixed anchor point. If movement between anchorages is required, a twin leg lanyard should be used RGL3, to provide constant protection.
Supplied as the following
Without karabiners
With RGK1 - 19mm karabiner
With RGK11 - 60mm Scaffold karabiner sown into the lanyard
The “Soft Edge” webbing used in the manufacture provides greater strength, wear and shear resistance compared to other webbing. It is also treated with a water repellent coating which should extend the life of this product.
This lanyard should be used when the operative is working from a static position, connected to a fixed anchor point. If movement between anchorages is required, a twin leg lanyard should be used RGL3, to provide constant protection.
Supplied as the following
Without karabiners
With RGK1 - 19mm karabiner
With RGK11 - 60mm Scaffold karabiner sown into the lanyard
View Basket
Recover Basket